DOCS

Effect Controls reference

Every Super8 parameter in Premiere Pro, in the same order as the Effect Controls panel. Defaults match the plugin shipping build.

SETUP

Install

Super8 is a macOS Metal GPU effect for Premiere Pro. Set Mercury Playback Engine to GPU Acceleration (Metal). The CPU path is pass-through, so you will not see the look without Metal.

Copy Super8.plugin into:

~/Library/Application Support/Adobe/Common/Plug-ins/7.0/MediaCore/

Quit Premiere fully (Cmd+Q), reopen, then search Effects for Super8. Drop it on a clip or adjustment layer.

GLOBALS

Overview

These sit at the top of the effect, outside the topic groups. Intensity scales the whole look. Seed re-rolls procedural variation for weave, dirt, leaks, and grain.

CONTROLRANGEDEFAULTWHAT IT DOES
Intensity0–100100Master mix for the effect. 0 returns the clean plate. 100 is the full Super8 stack at your current settings.
Seed0–1000391Integer seed for random film behavior. Change it when dust, weave jitter, or leak placement feels too familiar on a shot.

FORMAT

Scan Mode

Scan Mode picks how the picture sits in the Super 8 aperture. Default is Overscan. In Framed mode the Sprocket and Gate controls hide; Weave stays under Gate & Sprocket. Grain, dirt, leaks, and optics still run on the picture.

Full Format Overscan

Fits the source smaller inside the scanned frame so more gate and neighbor film read around the picture.

Overscan

Default scan. Shows gate structure and sprocket context without as much empty film surround as Full Format.

Framed

Fills the canvas with picture. No gate overlay. Use when you want emulsion and weave without visible film edges.

FRAME

Gate & Sprocket

Parent topic for the physical film window. In Framed mode the Sprocket and Gate controls hide; Weave stays under this group.

Everything under this group moves with weave, so sprocket holes and gate wear stay locked to the picture instead of sliding on top like a decal.

FRAME

Sprocket

Controls the perforated strip beside the frame. Leave Show Sprocket on for classic cartridge readout. Invert flips the strip treatment when you need the opposite edge treatment.

CONTROLRANGEDEFAULTWHAT IT DOES
Show Sprocketoff / ononToggles the sprocket strip. Off keeps gate geometry without holes.
Invertoff / ononFlips sprocket strip polarity / side treatment.
X-100–10022Horizontal placement of the sprocket strip relative to the gate.
Y-100–1000Vertical offset of the strip along the film path.
Scale0–10065Size of the sprocket holes and strip relative to the frame.
Border0–10026Thickness of the strip / hole border that reads against the picture.
Border Warmth0–10050Tints the sprocket border toward tungsten amber. Independent of Leak, so the whole strip can glow without the pulsed flare.
Softness0–1005Edge softness on sprocket holes. Low stays cut. High gets a little optical mush.
Wear0–10073How chewed-up the perforations look. Real carts are rarely clean.
Wear Random0–10095Variation between holes so wear does not repeat like a stamp.
Leak0–10020Warm flare on the sprocket lip. Pulses on a seed-locked hotspot so it keeps hitting the same edge, like light sneaking through a worn cart.

FRAME

Gate

The aperture window that crops and ages the picture. Softness and wear sell a real camera gate. Frame Gap opens the black between successive frames when neighbor film is visible.

CONTROLRANGEDEFAULTWHAT IT DOES
Softness0–1005Softens the gate edge into the picture. Low stays sharp. Raise for a slightly fogged aperture.
Wear0–10020Irregular bite and damage along the gate opening.
Wear Opacity0–10083How strongly gate wear prints over the image.
Wear Seed0–100062Separate seed for gate damage so you can re-roll wear without changing global Seed.
Roundness0–10022Corner radius of the gate. Higher reads more rounded cartridge window.
Scale0–10065Size of the gate aperture relative to the frame.
Frame Gap0–10028Black gap between this frame and neighbor frames in overscan layouts.

MOTION

Weave

Lives under Gate & Sprocket. Rigid film-plane jitter. The picture, gate, and sprocket share one transform, which is what separates this from a noise overlay.

Amount is supervised. Dragging it also writes the same value into Horizontal and Vertical so you can start balanced, then split the axes if a shot needs more side-to-side than up-down.

CONTROLRANGEDEFAULTWHAT IT DOES
Amount0–10025Master weave strength. Updates Horizontal and Vertical together when you change it.
Speed0–100100How quickly the weave path moves through time.
Horizontal0–10025Left/right weave only. Independent after you override Amount.
Vertical0–10025Up/down weave only.
Random Frequency0–10010How often extra random kicks interrupt the base weave path. Low stays loopy. High gets nervier.
Random Amount0–100100Size of those random kicks.

TEXTURE

Emulsion

Grain that lives in the film, not a floating overlay. Density and clump controls set the structure. Shadows / Mids / Highlights weight where grain reads hardest. Temporal keeps grain crawling frame to frame like real stock.

CONTROLRANGEDEFAULTWHAT IT DOES
Density0–10034Overall grain strength.
Clump Size0–10014Scale of grain clusters. Higher looks coarser / more dye-cloud.
Clump Softness0–10035Softens clump edges so grain feels emulsion-bound instead of digital speck.
Dye0–10028Chroma in the grain. Low is mono pepper. Higher splits color like dye clouds.
Shadows0–100100How much grain prints in dark tones.
Mids0–100100Grain weight in midtones.
Highlights0–10055Grain in bright areas. Default is lower so highlights stay cleaner.
Temporal0–100100Frame-to-frame grain evolution. 0 freezes the pattern. 100 crawls every frame.

DAMAGE

Dust & Scratches

Dust is particulate that rides the film plane. Scratches are longer score marks with thickness, curve, and travel speed. Density controls how often new marks appear. Amount / Opacity controls how hard they print.

CONTROLRANGEDEFAULTWHAT IT DOES
Dust Opacity0–100100Visibility of dust particles when they appear.
Dust Density0–10010How many dust hits you get. Keep low for believable carts.
Dust Scale0–1005Particle size.
Dust Softness0–10070Soft focus on dust. Higher looks more in the emulsion / softer scanned.
Dust Speed0–10055How fast dust patterns refresh along the roll.
Scratch Amount0–1003Strength of scratch marks.
Scratch Density0–1000How often scratches appear. Default is clean. Raise for abused stock.
Scratch Thickness0–10028Line weight of each scratch.
Scratch Speed0–10040Travel speed of scratches through the frame over time.
Scratch Curve0–10030How bent / non-linear the scratch paths are.
Scratch Length0–10099How far each scratch runs across the frame.

EXPOSURE

Film Effects

Light leaks and optional white pops at the head or tail of a clip. Leaks use a warm film-burn core that can cool off with Leak Warmth. White Pop Frames is integer length in frames for the flash ramp.

CONTROLRANGEDEFAULTWHAT IT DOES
Leak Amount0–1005How often / how present leaks are. Default is subtle.
Leak Intensity0–100100Brightness of the leak when it hits. Hot core goes toward white.
Leak Warmth0–100100Color of the burn. High stays amber. Lower slides cooler / bluer.
Leak Speed0–10046How fast leak shapes evolve over time.
White Pop Startoff / onoffFlash / blow-out at the beginning of the clip.
White Pop Endoff / ononFlash / blow-out at the end of the clip.
White Pop Frames1–304Ramp length in frames for the white pop when Start or End is on.

GRADE

Optics / Color

Optical smear and a simple grade stack after the film body. Softness and Halation are the lens-ish pair. Flicker breathes exposure. Saturation, Contrast, and Warmth push the plate toward cartridge color without a separate LUT.

CONTROLRANGEDEFAULTWHAT IT DOES
Softness0–10020Overall optical softness / diffusion on the image.
Halation0–10011Glow that bleeds off bright edges, stronger in highlights.
Vignette0–10011Darkens toward the corners of the gate / frame.
Flicker0–100100Temporal exposure flutter. Full default keeps the plate alive.
Saturation0–10056Color amount after the film stack.
Contrast0–10025Contrast push. Modest default so you can add grade on top.
Warmth0–10060Warm / cool balance for the overall plate.

WORKFLOW

Starting points

Defaults are already a usable Super 8 plate. For a cleaner commercial look, drop Weave Amount further, cut Dust Density and Scratch Density to 0, and ease Leak Amount. For a beat-up home-movie cart, raise Weave, Dust Density, Scratch Density, Gate Wear, and Flicker, and let Intensity ride near 100.

Keyframe Intensity or Scan Mode when you cut between locked-off dialogue and handheld B-roll. Seed is the fastest way to get a fresh dirt and weave take without rebuilding the shot.

Framed mode is the right call when the edit cannot show black gate, but you still want emulsion crawl and weave on faces.